2M 2000AMP Car Emergency Power Start Cable Whit Current Protector Car Battery Jumper Booster Line Copper Wire Clamps

1. In emergency situations, battery booster cables are very suitable for use in cars.
2. The new PVC material and ultra-sturdy pure copper teeth can be firmly connected.Reinforced clip, stable current, fixed sheath, safe insulation.Copper end clamps with PVC-coated handles provide protection.The wires are covered with a thick PVC insulation layer to provide flexibility without kinks.
3. The 1 3-meter-longflexible cable is convenient to connect with two vehicles.Color recognition is high, red is positive and black is negative. Effectively reduce the risk of accidental short circuit.
4. Complete set (positive cable with 2 clips and negative cable with 2 clips).
5. [Recommended use]: It is suitable for vehicles with displacement less than 3.0cc.

Type:Emergency Power Start Cable
Current: 2000A
THE CONNECTION PROCEDURE IS AS FOLLOWS:
(1) First, clamp the red wire of the starting cable on the positive pole of the red battery of the "rescued car".
(2) Then clamp the red wire at the other end to the positive pole of the red battery of the "rescue vehicle".
(3) Clamp the black wire onto the black negative battery of the "saved".
(4) Then clamp the black wire on the black negative battery of the "rescue vehicle".
(5) Start the engine of the "rescue vehicle" first, and then start the engine of the "rescue vehicle". If you find that the rescued vehicle still cannot be started, please check whether the metal contact part is in poor contact.
PRECAUTIONS:
1. The two vehicles cannot have any contact, and the two vehicles must have the same voltage.
2. If the battery freezes in winter, please do not use this starter cord.
3. Before connecting, the engines, audio and air conditioners of the two cars need to be turned off.
4. After you finish starting the engine, you need to remove the starter wir