Uses:

1. Seals around windows, doors, siding and base board

2. Fills cracks and joints, gaps around pipes, vents utility  lines and electrical outlets.

3. Seals and insulates gap between sole plate slab.

Directions:

1. Wear protective gloves, goggles and work clothes during use.

2. Clean surfaces of dirt grease and dust, then moistening the cavity.

3. Use between 5-40°C.

4. Shake can for 2 minutes vigorously.

5. Take off cap, screw gun onto the foam.

6. Hold can UPSIDE DOWN with tube pointing into far end of cavity, slowly press trigger to dispense foam. Test on experimental surface.

7. Fill cavity 40% with foam to allow for expansion

8.Use PU Foam Cleaner to remove excess uncured on nozzle and valve.

9. Dries tack-free in 20 minutes, cures in 24 hours

10.Cured foam can be trimmed, painted, sanded

Net volume - 750ml